You definitely want to add a unique supplemental light to your car headlights! Come and take a look at the classic yellow and white waterproof daytime running lights with a turn signal light belt from AUXITO!

These two daytime running lights have different ways to start the white light, the way the white daytime running the light turns on immediately and when it starts scanning. Installing different styles can give you different looks of your vehicle. In addition, this DRL bar also comes with a smart decoder, which can enhance the signal and increase the speed of lighting and changing. Up to 5000 hours of waterproof LED daytime running light strips can emit bright white light for a long time! No need to worry about frequent replacements! Save your repair costs.

FITMENT&SPECIFICS  

Product option:

• Daytime running light (white light when activated) l
• Daytime running light (when starting up, the light will always be white after a period of scanning)

Packaging included: Daytime running light strip*2

Light color: White yellow(turn signal)

Length: 23.6inch/60cm

Width: 0.59inch/15mm

Waterproof grade: IP67

Service life: 50000h

Installation position: front left & right headlight

Functions: White daytime running light, yellow turn signal light (Sequential Light)

Suitable models: Universal auto. Fit for cars, trucks, motorcycles, etc.

TOP FEATURES

IP67 High waterproof rating:

The waterproof design of the signal strip works even under extreme conditions, especially on rainy or foggy days.

Bendable and durable:

This soft LED strip light can be cut or bent to the length or shape you want for meeting your needs.

Low power consumption: 

Environmental-friendly,energy-saving,shock-proof, and anti-corrosion.

High brightness:

High luminous efficiency with high brightness light output improves driving safety.

Self-adhesive:

It comes with double side adhesive tape on the back side, just peel it off and stick directly without complex installation steps.

INSTALLATION STEP

• STEP1: Check your headlight size
• STEP2: Red wire connect to ACC( ) or headlight
• STEP3: Black wire connects to ground
• STEP4: Take out the turning bulb. Yellow wire connect to turn signal socket positive power supply
• STEP5: Install turning bulb back to the socket
• STEP6: Master driver installation effect
• STEP7: Copilot installation effect

Wire Connection: 

• 1. Red Wire: connect to the positive pole of the supply or ACC( )
• 2. Black wire: connect to the negative pole of the supply (-)
• 3. Yellow wire: connect to the positive pole of the turn signal ( )

NOTE:

Please note that folding or bending at a large angle is not suggested, or it will break the LED beads.